$ adb install SDRhound.apk
$ ./connect --device RTL2832U --rate 1.92MS/s  LIVE
MHz

sdrhound — android receiver

Turns a $25 RTL-SDR dongle into a wideband radio, an ADS-B aircraft tracker, a GSM control-channel analyzer, a NOAA satellite image decoder, and a DMR digital-voice receiver — entirely on-device. No server, no account, no subscription. Everything you see was demodulated on your phone in the last second.

Needs an RTL-SDR USB dongle, an OTG cable, and the free RTL-SDR driver app, which provides the USB connection and shows its own short start-up window when you press start.

display:
app / radio

Wideband receiver

Tune anywhere the dongle can reach and demodulate it live: WFM for broadcast FM, NFM and AM for two-way and aviation traffic, USB/LSB for HF single sideband. A band-plan overlay labels common allocations as you tune past them, and a squelch slider with hysteresis keeps noise quiet between transmissions.

modes
WFM · NFM · AM · USB · LSB
bandwidth
1.5 kHz – 220 kHz, adjustable per mode
squelch
dB threshold, 2 dB hysteresis
record
48 kHz WAV audio, or raw IQ as .cu8
display
spectrum + waterfall, peak hold, band-plan overlay
rds
broadcast FM station name, programme type and scrolling radio text, decoded live in WFM
layout
portrait, or a desktop-style landscape view with all settings in a side panel
background
optional: keep receiving with the screen off (shows a notification)
app / adsb

ADS-B aircraft tracker

Decodes 1090 MHz Mode S extended squitter directly from raw IQ — no external dump1090, no network feed. Positions are resolved from paired even/odd CPR frames the way the aircraft actually broadcasts them, then plotted on an offline radar display with range rings, trails, callsigns and flight levels.

decode
DF17/18 extended squitter, DF5/21 identity (squawk)
position
global CPR, even/odd frame pairing
tracked
callsign, altitude, speed, heading, squawk, trail
display
radar map or sortable list, tap for full history
app / gsm

GSM control-channel toolkit

A passive beacon scanner finds live base stations on GSM850/900 by their FCCH tone, then a soft-decision receiver chain — burst sync, deinterleave, Viterbi, Fire code — pulls BCCH/CCCH messages straight off the air. Verified messages can be watched live as hex, browsed in a Wireshark-style packet list, streamed out as GSMTAP, or saved straight to a .pcap file. An IMSI/TMSI catcher and a cell locator that drops the serving tower on a map round out the toolkit.

scan
FCCH beacon sweep across GSM850 / GSM900
decode
soft Viterbi + Fire code on BCCH/CCCH, self-calibrating AFC
capture
IMSI/TMSI catcher, live GSMTAP, recorded .pcap
locate
serving cell (MCC/MNC/LAC/CI) placed on a zoomable map — OpenCellID, Mylnikov or BeaconDB, no API key needed
app / satellite

NOAA APT image decoder

Point a wideband antenna at the sky during a NOAA 15/18/19 pass and watch a weather-satellite image build line by line as it transmits — no laptop, no SDR# needed. Each pass is a scrolling live preview you can save as a PNG once it's down.

format
NOAA APT, ~137 MHz NFM carrier
rate
2 lines/second, 2080 px/line
output
live scrolling preview, saved as PNG
app / keyup

DMR digital-voice receiver

KEYUP listens to DMR (Digital Mobile Radio) repeaters and simplex channels — the 4-level FSK system used by amateur and commercial handhelds. It locks onto each burst by correlating against the standard sync patterns, corrects the Link Control with the same error-correction and checksums real radios use, and shows who is talking to which talkgroup as it happens. Unencrypted voice is decoded on the phone and played through its speaker. A built-in channel scanner hops across a band and stops on any call it finds.

format
DMR (ETSI TS 102 361), 4FSK at 4800 baud, 12.5 kHz channels — conventional Tier I/II, no trunking
decode
burst sync on all four BS/MS patterns, Golay slot type, BPTC(196,96) Link Control with Reed–Solomon check
shows
colour code, talkgroup / destination, source radio ID, calls starting and ending, live burst list
mid-call
embedded Link Control in the voice bursts, so IDs appear even if you tune in after the call began
voice
AMBE+2 vocoder built into the app (pure Kotlin, no native library); unencrypted calls only
scan
presets for PMR446, 70 cm and 2 m, or your own range and step; roughly six channels a second, holds on a live call, keeps a list of hits
tune
type a frequency, or swipe the digits; spectrum and waterfall stay live while decoding
limits
not included: encrypted calls, trunked (Tier III) systems, DMR data such as SMS and GPS, or both timeslots at once. Beta: verified against reference decoders and simulated signals, so reports from real repeaters are welcome
read before you scan

This app only receives — it never transmits. All features work against your own RTL-SDR dongle and antenna; nothing leaves your phone unless you open the cell locator: it sends the serving tower's public ID to OpenCellID, Mylnikov or BeaconDB and fetches map tiles from OpenStreetMap.

The GSM tools decode control-channel broadcasts that are, by design, sent in the clear — the same signals grgsm_livemon and similar research tools have read for years. Radio regulations differ by country and intercepting traffic that isn't addressed to you can be restricted even when it's unencrypted. Use these features on your own test equipment or where you're otherwise authorized, and check the rules where you live before you go further.

KEYUP decodes DMR calls that are sent unencrypted, including the radio IDs and voice of people who did not address you. Some countries restrict listening to, or acting on, such traffic. Encrypted calls are not decoded. Check your local law before you use it.